|
HBM300
 The
HBM300 uses the TE300 series drifter.
Included with the HBM300:
- HBM mounting bracket
- TE300 hydraulic
percussion drill
- HCF or PCF
feed systems with up to 12.5' drill stroke
- TE30920 air/hydraulic controls and hosing
- JB779 nitrogen charging kit for TE300 diaphragm
- On-site training and setup in the continental
USA
- Parts and service manual
Optional Equipment:
- TE300HT high torque version of TE300
- HC6 hydraulic centralizer
- HCH6 simple hydraulic
foot clamp
- EH30920
radio controls
- TE30851 water
mist system
System Requirements:
- Machine must be plumbed with auxiliary hammer
kit
- HBM300 requires 30GPM @ 2250 PSI
- HBM300HT requires 37GPM @ 2250 PSI
- Boom lift capacity of 2,000 LBS.
- Flushing medium to clean holes (air or
water)
- Approximate weight is 1300 to 1800 lbs.,
depending on feed length
- Auxiliary hydraulic cooler recomended for
production drilling
|
