• Drilling Attachments
  1. Excavator HEM
  2. Backhoe HBM
  3. Skid Steer HCM
  4. Mini-Attachment MME
• Limited Access Drills
  1. TD75
  2. MP250
• DrillAll Geo
• Drifters/Percussion Drills
  1. TE250
  2. TE300
  3. TE550
• Rotary Heads
  1. RDS250
  2. RDS350
  3. RDS550
  4. RDSH1000
• Feed Systems
  1. ACF
  2. PCF
  3. PCFH
  4. HCF
  5. HCFH
• Options
  1. HC6 Centralizer
  2. HCH6 Clamp
  3. HCHD6 Double Clamp
  4. Misting
  5. Shock Subs
• Used Equipment
• Photo Gallery
• Download Brochures

HBM500

The HBM500 is designed to provide a mobile drill rig that can drill 3 1/2" blast holes on a production basis. Using the TE500 drifter does this without excessive stress on the drifter. The HBM500 is very good alternative to replacing an old air trac.

Included with the HBM500:

• HBM backhoe mounting bracket
• PCF12 hydraulic chain feed with 12.5' of drill travel
• TE500 hydraulic percussion drill
• TE50920 controls and hosing
• JB779 nitrogen charging kit
• One drill steel, bit and bit grease
• On-site training in the continental USA
• Parts and service manual

Optional Equipment:

• HC6 hydraulic centralizer
• EH30920 Radio Controls
• TE30851 water mist system

System Requirements:

• Machine must be plumbed with auxiliary hammer kit
• HBM500 requires 40GPM @ 2500 PSI
• Boom lift capacity of 2,200 lbs.
• Flushing medium to clean holes (air or water)
• Approximate attachment weight is 1800 lbs.
• Auxiliary cooler recommended for production drilling