|
HEM300
 The
HEM300 uses the TE300 series drifter. With
the different configurations of the TE300
you can install:
- 30mm to 40mm Injection Anchors (IBO bars)
- Blast holes up to 2 1/2” in production
- DX geothermal wells, 2 1/2” to 3”
with depths to 100’
- Rock Bolting and Soil Nails-Tiebacks
HEM300 drill package includes the following items:
- HEM excavator mounting bracket
- HCF or PCF
feed system, up to 14.5’ drill travel
- TE300 hydraulic
percussion drill
- EH30920
radio controls
- JB779 nitrogen charging kit TE300 accumulators
- HP360 hydraulic
positioning with feed extend
- On-site training and setup in the continental
USA
- Parts and Service manual
Optional Equipment:
- TE300HT high torque version of TE300
- HCH6 simple hydraulic
foot clamp
- HC6 hydraulic centralizer
- TE30851 water
misting system (pneumatic powered)
- Hydraulic oil cooler
System Requirements:
- Machine must be plumbed with auxiliary hammer
kit
- HEM300 requires 30 GPM @ 2250 PSI hydraulic
flow
- HEM300HT requires 37 GPM @ 2250 PSI hydraulic
flow
- Boom lift capacity of 2,500 LBS.
- Flushing medium to clear holes (air, water,
grout)
- Aproximate weight is 2,000 - 2,500 LBS.
depending on feed length
- Best mounted on 13 - 20 ton excavators
- Auxiliary hydraulic cooler recomended for
production drilling
|
