DrillAll GEO
The DrillAll GEO was designed for limited access drilling in the retrofit geothermal market. It is well suited for installation of the DX copper loops offering 45-degree tilt in the mast. This allows the circular hole pattern of DX to be drilled out only moving the machine one time. To accommodate the high angles required for DX installation the mast uses 5-foot drill pipes.
For GX installation the DrillAll GEO can be fitted with a mast using 10-foot drill pipes while limiting the mast angle to +- 5 degrees. In this configuration the DrillAll can accomplish the 200-foot holes required for GX geothermal.
This is an excellent machine, built entirely at our Montrose facility it is a powerful drill packed into a small package.
