RDS350 Rotary Head For Sale
$9,500

Eleanor Skeggs
P: (516) 944-7154
F: (516) 944-2522
www.nynjhelix.com
www.scobbo.com

31 pieces of 5' by 2 3/8 API REG Drill Pipe- $175 each

Joe Williams
Geo-Renew Systems
3045 Grange Hall Rd., Suite 7
Holly, MI. 48442
248-531-0325 office
248-807-2406
jwilliams@georenew.com

RDS250 Rotary Head
Used on one job. $6,800

Eleanor Skeggs
P: (516) 944-7154
F: (516) 944-2522
www.nynjhelix.com
www.scobbo.com

WD100H Wagon Drill
Low hours
$25,000.00

1,550 ft/lbs of torque with 3,500 lbs. of pullback. 47 HP gasoline engine, great for small wells or quarries. Comes with 90 feet of drill pipe, asking $25,000.

Please contact Jim Woodward at
1 (541) 462-3200 or
fax 1 (541) 462-3400 or
by email: woodward4321@hotmail.com

For sale, system designed to use high RPM rotary with low energy percussion to extract core samples quickly, in a radioactive environment.

This system was designed, assembled, and purchased from TEI about 5 years. It was only turned on once in the TEI facility shop to approve operation (2 hour run time - not used in field) prior to taking receipt of it for government program that was never implemented. Has been in storage since 2005 under tarp in arid climate. Will need some work to install fresh filters, batteries, etc.

RDS350 rotary/TE250 percussion head with HCF Feed. Built on a removable horizontal platform skid (powder coated with hydraulic level adjustment). Can be disassembled in to 3 pieces for storage/transport. Currently rigged and outfitted for core sampling. Several sets of custom made bits (diamond and tungsten/carbide for hard rock penetration). Includes Torus Type-K Blow Out Preventer (annular seal). 30' (approximate) drill rod, guides, centralizers, saver subs, reamer shells, split spoon core barrel sample sleeves, Victaulic/hydraulic break-up clamp, etc. Added onboard instrumentation: pressure, airflow.

Remote operation pendant with long umbilical. All cables to interconnect air, hydraulics, electric.

Self-contained support skid system:

• Van air unit with Cummins Diesel #1; Sullair compressor (185CFM @ 150PSI); Oil Cooler; Hydraulic PTO;
• Cummins Diesel #2 with Onan 18kW electric generator
• Water injection pump and +50 gal poly tank

All manuals and documentation electronic and hard copy.

Asking $120,000 for all pieces. Will show drill in operation and load onto truck at site.

Contact:
Eric Dysland
Office (509) 942-1114 ex1403
Email eric.dysland@impactservicesinc.com