Used Equipment
If you would like to add any of your used equipment to this page please submit a description and no more than three photos to Joe Patterson.
MME83
Used only on one job $19,000
Contact Bill Johnson Horton Construction Cell (401) 578-1938 Office (401) 438-4582 ex22 bjohnson@hortonconstruction.com
EuroDrill HD2004 Hydraulic Drifter and Nitrogen Charging Kit with 600 hours.
$37,500 new, asking $25,000
Contact Bruce Barget or Joe Williams GeoRenew Systems (248) 531-0325 bbarget@georenew.com
Hollow Stem Augers
$9,488 new, asking $6,000
(20) 2 1/4"ID X 6" OD X 5' Hollow Stem Augers (2) cutter heads for 2 1/4" HSA (1) U-joint swivel adapter RH H55 to 1 5/8 Hex connection (1) RH Shank adapter for HD2004
Percussion Drilling and Casing
$9,525 new, asking $6,000
(5) 88.9mm X 1.5 M Klemm percussion casing (new) (1) Casing crown bit (new) (5) Casing nipples (new) (1) H55 to 3" casing adapter/air swivel (15) T38 Rod 1.5 meter length (4) T38 X 5' speed rods (MF) (3) T38 bits - 4" ballistic button new 3" ballistic button used, 3-inch drag bit, T38 F (8) T38 female couplings (3) H55 to T38 male adapters (2) swivels H55 to T38 threads
2-inch Grout Casing
$4,775 new, asking $3,700 (Grout Casing)
(21) 2" I.D. X 5' grout casing (1) 2" I.D. drag bit for grout casing (1) Sub Adapter
Beretta - T53
Asking $165,000.
Contact Rick Sykes (919) 730-5062
High Flow CAT 305 Mini-Excavator
High Flow CAT 305 mini excavator plumbed to run the MME250. 300 hours on this machine with the extra hydraulic valve to increase the flow to 25 GPM @ 2,500 PSI.
Asking $46,600, excavator is located in Wallace, Idaho.
Contact Grant Brackebusch at (208) 783-1032 or gbrack@newjerseymining.com.
